How to Mount the Cisco Webex Room Navigator: Front vs. Side Bracket
If you've specified or installed the Cisco Webex Room Navigator, you already know it's one of the cleaner scheduling panels on the market. Low profile, good glass, solid software integration. The question most integrators run into isn't the device — it's the mount.
Conference room glass has gotten more architectural. Frameless partitions, narrow mullions, custom aluminum profiles. The generic bracket that ships with most scheduling hardware wasn't designed for any of that. It was designed to clear the compliance checkbox, not to look intentional on a Teknion frame or an Avanti Systems mullion.
That's the gap we built into.
Front Mount vs. Side Mount — It's Not Just Preference
The difference between front and side mounting comes down to the partition system and what the designer specified — not personal preference.
Front mounting is for glass partitions where you're anchoring directly to the face of the panel. The PowerBx Front Bracket sits flush against the glass, uses a low-profile adhesive and mechanical fastener system, and keeps the Navigator tight to the wall plane. No visible hardware from the corridor. No gap between device and surface. This is the right call for most open-plan office buildouts where the glass is the feature.
Side mounting is for mullion and frame applications — situations where the Navigator needs to sit beside the door opening rather than on the glass face. The Side Bracket indexes off the vertical mullion or door frame, giving you a clean 90° presentation without touching the glass at all. If the partition manufacturer or the GC is protective of their glass warranty, side mounting is often the only acceptable installation method anyway.
Both brackets are engineered to the same tolerances. The difference is geometry, not quality.
What the Partition System Actually Dictates
This is where the job site reality matters more than the spec sheet.
Teknion, Avanti Systems, Dirtt, Modernfold, Haworth Enclose — they all have different mullion profiles, different glass thicknesses, different reveal depths. Before you specify front vs. side, you need to know:
- What's the mullion width? Narrow mullions (under 1.5") limit your side mount options.
- Is the glass tempered or laminated? Some laminated systems prohibit adhesive anchoring to the glass face.
- What's the clearance from the door strike to the edge of the glass? The Navigator has a minimum offset requirement from the door swing.
- Does the partition manufacturer have a hardware approval process? Some do. Get sign-off before the bracket goes on.
We've run into all of these on real projects. The bracket has to work within whatever the interior architect specified — not the other way around.
PoE: The Clean Install Default
Both bracket configurations support PoE power. One Cat6 cable handles power and data. No outlet, no transformer, no junction box behind the glass. For any installation where the wall or partition cavity isn't accessible — which is most commercial glass installs — PoE is the right call from the start.
If you're in a situation where PoE isn't available at that drop, PowerBx carries the adapters to bridge it. But spec PoE from the switch at the start of the project and you won't be solving a power problem on install day.
Software Compatibility
The Navigator runs natively on Cisco Webex and integrates with Microsoft Teams Rooms, Google Meet hardware mode, and most major room booking platforms through Webex Control Hub. The bracket doesn't affect any of that — but it does affect serviceability. Both the Front and Side Bracket are designed for tool-assisted removal without damaging the glass or the mullion, which matters when a device needs to be swapped or a software update requires a hard reset.
Specifying the Right Bracket
- Glass face installation, frameless or minimal frame partition → Front Mount Bracket
- Mullion or door frame installation, framed partition system → Side Mount Bracket
- Mixed partition types across a floor plate → specify both, install per location
Lead time is short. Both brackets ship from domestic inventory. If you have a project with unusual mullion geometry or a partition system we haven't listed compatibility for, reach out — we've done custom variations before and it's usually a faster conversation than it looks.
The Navigator is a good piece of hardware. It deserves a mount that matches.